I keep suffering a lack of decent process supervision mechanisms provided by operating systems I use.
Most systems and software seem to have this idea that a “start up script” is the right approach.
This is horribly wrong as is demonstrated by lots and lots and lots of tools that exist to do that on top of so many really awful “ps via cron” kind of things people hack together or process counts via nagios or whatever.
This post describes alternatives I’ve found to help relieve my suffering, but has ended up exceedingly long. I’ll provide quick links to specific sections:
The worst one of these I’ve personally seen was a group of contractors who pieced a system together via tibco. There was a computer that had a process that needed to be monitored. There was another computer that ran a monitor thing that would send out messages over tibco that would be processed by an agent on the first machine that would run a really long shell script that would do some
awk and other stuff to search for a process and then maybe restart it before replying back across the tibco bus.
It did this about once a minute and used something like 60% of the CPU to verify the machine was still running. They demonstrated this to me and was all ready for me to tell them how amazed I was with their rube goldberg sysadmin skills, but my response didn’t leave them with the good feeling they sought:
“Wow. You reinvented init and cron, but managed to make them both less reliable and consume more CPU than I could’ve imagined.”
Sometimes, these tools can be used for good, but often, they’re variations on the same theme as above. You’re polling your process list, or a pid file, or whatever to try to see if another process is running and then restarting it if it fails.
Many people seem to grab these tools with the goal of rerunning their start script sometime after they’ve noticed the process is not running. This is the mentality I’m hoping to correct.
And this brings me to my point…
Don’t start programs, run programs.
init already does this. It does it very efficiently, with no CPU overhead in the general case, no latency in the exceptional case, no custom scripts to write, and with absolute reliability (that is, it won’t forget to run your command, and it won’t crash without taking the entire operating system with it).
Unfortunately, init has historically not been very easy to use use for your own processes. I’ll break it down a bit here to help you keep your stuff running.
Note: In every case, it’s assumed that you have a program that wants to run that does not daemonize on its own. Self-daemonizing programs start you down the path to hell. You can’t use any sane keepalive techniques so you have to resort to polling process lists or checking the pid or something. Even managing that pidfile gets hard when you combine it with things that change their own uid for safety (because you should never run anything as root).
Mac OS X has launchd which combines init, cron, inetd, and a few other things rolled into one.
Launchd provides tremendous amounts of granularity over control of processes and extends that to users themselves to run applications consistently on events.
The following example shows how you can have a program that runs consistently while you’re logged in. Place this in
~/Library/LaunchAgents/com.example.someprogram.plist and launchd should do its magic to keep it going.
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.example.someprogram</string> <key>KeepAlive</key> <true/> <key>RunAtLoad</key> <true/> <key>ProgramArguments</key> <array> <string>/path/to/someprogram</string> </array> </dict> </plist>
For disconnected use, you can build a similar plist and place it in
/Library/LaunchDaemons/, add a
UserName attribute and have the system maintain a program on behalf of another user for you quite easily.
Much, much more can be done with launchd (such as run programs on filesystem and network events). It’s open source and a horrible shame it isn’t everywhere, as it really does provide a tremendous benefit.
Solaris has smf which is similar to launchd, but provides even more control over lifecycle, permissions, dependencies, fault management and many other things.
If you’re using Solaris, you probably understand it already, otherwise I’d recommend reading the smf docs to understand how to use it to manage your system.
Recent versions of ubuntu ship with upstart, which is the least modern of the modern system facilities, but at least does allow you to specify that you want to run an application instead of just start it.
Here’s an example upstart script I wrote for a twisted app that I needed to keep running on an ubuntu box:
description "useful description" author "Dustin Sallings <firstname.lastname@example.org>" start on runlevel 2 start on runlevel 3 stop on runlevel 0 stop on runlevel 1 stop on runlevel 4 stop on runlevel 5 stop on runlevel 6 chdir /path/to/project/directory exec /usr/bin/twistd --uid=daemonuser --syslog -ny project.tac respawn
Note that this relies on
twistd to change the uid since it’s more straightforward than using
sudo to change the userid before invoking the start script.
FreeBSD, and most BSDs for that matter have an init that will supervise processes defined in
/etc/ttys. This is about as primitive as it can get, but it works fine.
For example, if you wanted to run
sshd on a FreeBSD box and make sure that it can never die, you could add the following to
sshd "/usr/local/etc/sshd_tty" unknown on
/usr/local/etc/sshd_tty exists primarily to eat the implicit argument init passes to the program it runs. For this, I used the following script:
#!/bin/sh exec /usr/sbin/sshd -D
/etc/ttys basically exists for getty type services, but it’s suitable for any other process that needs to be supervised.
After any modification to
/etc/ttys, you must run
init q for your changes to take effect.
On any vanilla Linux system (that is, systems that don’t use a modern init as well as other systems with similar init mechanisms), you can do something similar to the above with
/etc/inittab, although it has no implicit argument, so you can directly invoke sshd.
For example, the following works on my RedHat 5.4 box:
After adding this entry (and, of course, making sure you don’t already have an sshd server running), you can run
/sbin/telinit q to get it to reload.
It’s possible to bring in a third-party program to supplement an init that’s less awesome than launchd and smf. I personally have limited experience doing this, but there’s one in particular that I’ve been using and found to do a good job.
It’s a bit weird out of the box, though. It really wishes a file structure existed that is just not natural on any UNIX system, but some ports overcome that a bit.
However, it’s very composable and has a lot of small tools that each do one thing really well.
I’ve got an OpenBSD machine that’s customized to the point where I wrote my own
/etc/rc from scratch. This machine runs my DNS and DHCP services as well as a few other things around the house.
I used to have a problem where it’d lose power or something and one of the processes wouldn’t come up cleanly – very often DHCP, which made things rather difficult for me. I thought this would be a great place to try daemontools for the first time.
It has so far made things much easier to deal with.
One service I have running, for example, is sample_devices from my ibutton suite (thermometers → multicast, basically). This needs to run as a user who can access
/dev/tty01 (I don’t run stuff as root unless absolutely required) and has a bit of init.
For this to work, I just have to create a
run file in
/services/sample_devices which looks like this:
#!/bin/sh mkdir /tmp/sample chown uucp /tmp/sample exec setuidgid uucp /usr/local/sbin/sample_devices \ -b /dev/tty01 -c /tmp/sample \ -m 188.8.131.52 -p 6789 -t 64 -s 2121
Note that the
exec is important, as daemontools has a lot of control utilities which requires it to know the pid of the actual running process, not a shell that started it. It’s good practice anyway.
The one thing I don’t like about daemontools is that the service directories contain the startup scripts, control sockets, as well as other lock states. It’d serve me better if my service definitions lived somewhere in
/etc/ and the runtime control lived somewhere in
/var/run, but I’m pretty happy with the results.